[PRECELLYS] Cow marrowbone and human teeth sample grinding with 7ML metal tube

Sources: Bertin Technologies

Context

Up to now, the grinding of very hard samples like teeth and bones requires a pre-grinding step in liquid nitrogen with hammer or mortar in order to get really small pieces. With the new 7mL tube designed in metal, Precellys is now able to grind up to 6 mammalian bones or teeth samples without any pre-treatment. This offers a real alternative to manual grinding.

Materials

Precellys� Evolution + Cryolys �
Precellys � kit : 7mL metal tube (ref: KT03961-1-602.M) + 3 x 6,8 mm ceramic beads (ref. KT03961-1-107.BK)
Samples : 200 mg of cow marrowbone; one human teeth (premolar), dried for about 3 years
No buffer (dry grinding)

Protocol

Precellys Evolution

Bones : 7500 rpm � 10x20s (1 min break)

Teeth* : 7500 rpm � 1x20s

*The whole teeth is placed into the metal tube and the metal tube is then cooled into liquid nitrogen before grinding

Analysis method : DNA extraction by following standard protocol

Results

du117results

The combo Precellys Evolution + metal tube allows to get a fine powder of hard samples in a very short time. Only 20s for the teeth.

The tube can then be reused after cleaning with detergent solution and/or decontaminated by autoclaving.

Conclusion

The combination of 3D-grinding with Precellys� Evolution and a metal tube makes easier the extraction of nucleic acid from very hard samples like bones and teeth. In addition to the capability to process 6 samples at once, the� preparation time is dramatically decreased. The quality and quantity of extracted molecules is significantly increased.